Use the longer M3 screws, slide it through the bottom plate and secure in place with a nylon nut. To attach the Kombini to the R5X frame we use the included hardware in a bit of a different fashion in order to accomodate the single board build. The Kombini has a power distribution board and flight controller all in one. Since we are using the FuriousFPV Kombini we do not need the included PDB. You don't have to install the standoffs at this point, we just chose to do this step now.Īlthough we did not use it in this build, the included power distribution board you receive with the frame is an excellent choice if you need to use a PDB. With this method if an arm does break you can replace the arm with only removing 2 screws. Using the longer screws and standoffs we can secure the arms into place. Using the plate that has the blind nuts installed, with the nut portion on top, we sandwich the arms between this plate and the smaller bottom plate and secure in place with short screws. If you choose to use Power Pack E (Good) or Power Pack E (Best), follow the same process from the build video. We used a Power Pack E (Better) with the Emax red bottoms for this build. The xHover R5X can be built with any of our Power Pack E options. The xHover R5Xframe is designed to be painless to work on and repair.
0 Comments
Leave a Reply. |